FixVault
Home › Mitsubishi › 2007 › Outlander ES › Repair and Diagnosis › Electrical › Body Electrical › Chassis Electrical › Lighting › Special Tools

Special Tools

SPECIAL TOOLS SPECIFICATION

TOOL Tool number and name Supersession Application
G04873500
 MB990784
Ornament remover		 General service tool Removal of front fog light bezel
a
G04873501G04873502G04873503G04873504

b
G04873501G04873502G04873503G04873504

c
G04873501G04873502G04873503G04873504

d
G04873501G04873502G04873503G04873504
 MB991223
  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222

Harness set
  1. Test harness
  2. LED harness
  3. LED harness adaptor
  4. Probe
 General service tools Continuity check and voltage measurement at harness wire or connector
  1. Connector pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection
G04873505
 MB991529
Diagnostic trouble code check harness		 Tool not necessary if the scan tool (M.U.T.- III) is available Leveling motor drive test
G04873506
 MB991658
Test harness set		 Tool not available Height sensor check
a
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

b
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

c
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

d
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

e
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

f
G04873507G04873508G04873509G04873510G04873511G04873512G04873513

g
G04873507G04873508G04873509G04873510G04873511G04873512G04873513
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III sub assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Daimler Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T.-III trigger harness
 MB991824-KIT
NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: M.U.T.-III main harness B (MB991911) should be used. M.U.T.-III main harness A and C should not be used for this vehicle.
Diagnostic code, service data and actuator test check.
G04873514
 MB992006
Extra fine probe		 - Continuity check and voltage measurement at harness wire or connector.
About FixVault