Door - Front: Latch: Installation

Fig 1: Identifying Electrical Connector And Latch Screws

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

1. Install the latch (2) into the door.
2. Connect the electrical connectors (3).
3. Install the screws (1) and tighten to 9.5 N.m (85 in. lbs.).
   Fig 2: Identifying Lock Cylinder And Exterior Handle

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4. Connect the outside handle (3) and lock cylinder (2) links.
   Fig 3: Identifying Lock Knob And Inside Handle Links

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
5. Connect the lock knob (1) and the inside handle (2) links.
   Fig 4: Identifying Watershield

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
6. Install the watershield. (Refer to BODY/DOOR - FRONT/WATERSHIELD/INSTALLATION )
7. Adjust the latch as needed. (Refer to BODY/DOOR - FRONT/LATCH/ADJUSTMENTS )