Configuration Function
WARNING: This page is about a different variant/trim than selected.
Using the ETACS system of scan tool MB991958, the following function can be programmed. The programmed information is held even when the battery is disconnected.
CONFIGURATION FUNCTION CHART
| Adjustment item (scan tool MB991958 M.U.T.-III display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Auto door unlock by P position | Auto door unlock by P position function < Vehicles with TC-SST > | Disable | No function (default) |
| Always enabled | Always with function |