FixVault
Home › Mitsubishi › 2008 › Outlander LS, AWD › Repair and Diagnosis › Brakes › Traction Control › Active Skid Control System (ASC) › Diagnosis › Diagnostic Trouble Code Procedures › DTC U0125: G And Yaw Rate Sensor Message Time-Out Error/Message Error › DTC Set Conditions

DTC Set Conditions

This DTC is set when ASC-ECU cannot receive the signal sent from the G and yaw rate sensor while the ASC-ECU supply voltage has no abnormality.

NOTE: When the ASC-ECU supply voltage has an abnormality, the low voltage code C2100 is set, and U0125 is not set.
About FixVault