Fuel Level Sensor Float Height

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel pump module (Refer to FUEL TANK ).

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

Standard value:

FLOAT POSITION CHART

Float position	Float height [mm (in)]
Float position	Main	Sub
Stopper position "F" (height A)	140.9 (5.5)	14.2 ± 3.0 (0.5 ± 0.1)
Stopper position "E" (height B)	39.1 (1.5)	179.3 ± 3.0 (7.0 ± 0.1)

Fig 1: Fuel Level Sensor Float Height

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.