Module - Front Control: Installation

WARNING: This page is about a different car, the 2007 Mitsubishi Raider. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Control Module (FCM), Four Fasteners And Power Distribution Center (PDC)

G04853424

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Connect the Power Distribution Center (PDC) (3) to the Front Control Module (FCM) by lining up the electrical connector and pushing the two together.
Install the four fasteners (2) securing the FCM (1) to the PDC (3).
Install the Integrated Power Module (IPM).
Connect the battery negative cable.