Diagnostic Test
WARNING: This page is about a different car, the 2007 Mitsubishi Raider. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE
- With the scan tool, read the active DTC's.
Q: Does the scan tool display this DTC as active?
Yes :
- Replace and program the Front Control Module in accordance with the service information.
- Perform BODY VERIFICATION TEST - VER 1 . (Refer to ELECTRONIC CONTROL MODULES/MODULE - FRONT CONTROL/DIAGNOSIS AND TESTING).
No :
- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.