Module - Front Control: Removal

WARNING: This page is about a different car, the 2007 Mitsubishi Raider. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Control Module (FCM), Four Fasteners And Power Distribution Center (PDC)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Disconnect and isolate the battery negative cable.
Remove the Integrated Power Module (IPM) from the engine compartment.
Remove the four fasteners (2) securing the Front Control Module (FCM) (1) to the Power Distribution Center (PDC) (3).
Separate the FCM from the PDC by pulling the two straight away from each other to disengage the electrical connector.