FixVault
Home › Mitsubishi › 2011 › Endeavor LS, AWD › Repair and Diagnosis › Electrical › Gauges › Combination Meter Assembly And Vehicle Speed Sensor › On-Vehicle Service › Fuel Level Sensor Check › Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

  1. Remove the fuel pump module and fuel level sensor (sub) (Refer to FUEL TANK .).
  2. Move the float and measure height A at point "F" (highest) and B at point "E" (lowest).

    Standard value: 

    STANDARD VALUE CHART

    ITEM FUEL LEVEL SENSOR (main) FUEL LEVEL SENSOR (sub)
    Height mm (in) A at point "F" 149.3 (5.9) 30.5 ± 3.0 (1.2 ± 0.1)
    B at point "E" 34.7 (1.4) 177.7 ± 3.0 (7.0 ± 0.1)
    Fig 1: Checking Fuel Level Sensor Float Height - Main
    G05106322Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If any check is not correct, replace the fuel pump module or fuel level sensor (sub).
    Fig 2: Checking Fuel Level Sensor Float Height - Sub
    G06700519Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
About FixVault