Symptom Chart

CAUTION: During diagnosis, a DTC associated with other system may be set when the ignition switch is turned "ON" position with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.

SYMPTOM CHART

SYMPTOM	INSPECTION PROCEDURE	REFERENCE
The multi-center display does not show any information.	1	INSPECTION PROCEDURE 1: THE MULTI-CENTER DISPLAY DOES NOT SHOW ANY INFORMATION.
"-" (Ambient air temperature sensor error) is displayed on the ambient air temperature display. <Vehicles with TYPE 1>	2	INSPECTION PROCEDURE 2: "-" (AMBIENT AIR TEMPERATURE SENSOR ERROR) IS DISPLAYED ON THE AMBIENT AIR TEMPERATURE DISPLAY. <VEHICLES WITH TYPE 1>
The ambient air temperature display does not change normally. <Vehicles with TYPE 1>	3	INSPECTION PROCEDURE 3: THE AMBIENT AIR TEMPERATURE DISPLAY DOES NOT CHANGE NORMALLY. <VEHICLES WITH TYPE 1>
On the audio screen, "E" cannot proceed to next screen.	4	INSPECTION PROCEDURE 4: ON THE AUDIO SCREEN, "E" CANNOT PROCEED TO NEXT SCREEN.
The compass cannot be calibrated manually, or goes out of calibration easily. <Vehicles with TYPE 1>	5	INSPECTION PROCEDURE 5: THE COMPASS CAN NOT BE CALIBRATED MANUALLY, OR GOES OUT OF CALIBRATION EASILY. <VEHICLES WITH TYPE 1>