Disassembly And Assembly <3.8L Engine>: Notes
CAUTION:
- Be careful not to damage the ABS rotor, which is attached to the EBJ outer race during disassembly and reassembly.
- Never disassemble the EBJ assembly except when replacing the EBJ boot.
NOTE:
For EBJ boot removal and installation, refer to BJ/EBJ BOOT REPLACEMENT
.
Required Special Tools:
- MB990810: Side Bearing Puller
- MB990890: Rear Suspension Bushing Base
- MB990930: Installer Adapter
- MB990932: Installer Adapter
- MB990934: Installer Adapter
- MB990938: Installer Bar (snap-in type)
- MB991172: Inner Shaft Installer Base
- MB991248: Inner Shaft Remover
- MD998369: Bearing Installer