Fastener Tightening Specifications
ITEM SPECIFICATION
| ITEM | SPECIFICATION | |
|---|---|---|
| Transaxle | Transfer drive gear mounting bolt | 34 ± 2 N.m (25 ± 1 ft-lb) |
| Output shaft bearing retainer mounting bolt | 29 ± 2 N.m (21 ± 1 ft-lb) | |
| Output shaft lock nut | 170 ± 10 N.m (125 ± 7 ft-lb) | |
| Rear cover mounting bolt | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Oil pump mounting bolt | 29 ± 2 N.m (21 ± 1 ft-lb) | |
| Torque converter housing mounting bolt | 48 ± 6 N.m (35 ± 4 ft-lb) | |
| Valve body mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Fluid temperature sensor mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Manual control shaft detente mounting bolt | 6.0 ± 1.0 N.m (53 ± 9 in-lb) | |
| Valve body cover mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Park/neutral position switch (PNP switch) mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Manual control lever mounting nut | 22 ± 3 N.m (16 ± 2 ft-lb) | |
| Output shaft speed sensor mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Input shaft speed sensor mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Eye bolt | 24 ± 3 N.m (18 ± 2 ft-lb) | |
| Oil cooler feed tube mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Control cable support bracket mounting bolt | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Harness bracket mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Roll stopper bracket mounting bolt | 90 ± 10 N.m (66 ± 7 ft-lb) | |
| Components | Differential drive gear mounting bolt | 135 ± 5 N.m (100 ± 4 ft-lb) |
| Solenoid valve support mounting bolt | 6.0 ± 1.0 N.m (53 ± 9 in-lb) | |
| Valve body mounting bolt | 11 ± 1 N.m (97 ± 9 in-lb) | |
| Plate mounting bolt | 6.0 ± 1.0 N.m (53 ± 9 in-lb) | |