>>A<< Lighting Control Sensor Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: After executing the lighting control sensor (rain sensor) adaptation, do not touch the lighting control sensor (or do not move it from the fixed position).

Mount the lighting control sensor onto the optical coupler, and then connect the connector.
When reusing the lighting control sensor or when the lighting control sensor is pushed to check the installation condition, install the connector and the lighting control sensor cover and wipe the windshield thoroughly. When the windshield is dry, execute the lighting control sensor (rain sensor) adaptation. Refer to LIGHTING CONTROL SENSOR (RAIN SENSOR) ADAPTATION .
NOTE: Be careful not to touch the lighting control sensor receiver. (The lighting control sensor receiver has limited resistance to oil.)