Fan Control Relay Check
WARNING: This page is about a different variant/trim than selected.
CONTINUITY SPECIFICATION
| Battery voltage | Terminal No. to be connected to tester | Continuity test results |
|---|---|---|
| Not applied | 2 - 4 | Continuity (Less than 2 ohms) |
| 2 - 5 | Open circuit | |
| Connect terminal No. 1 and battery (+) terminal. Connect terminal No. 3 and battery (-) terminal. |
2 - 5 | Continuity (Less than 2 ohms) |
| 2 - 4 | Open circuit |