FixVault
Home › Mitsubishi › 2012 › Outlander ES › Repair and Diagnosis › Drivelines & Axles › Axle Shafts › Front Axle › Special Tools

Special Tools

SPECIAL TOOLS DESCRIPTION CHART

Tool Tool number and name Supersession Application
G05093329
 MB990767
Front hub and flange yoke holder		 MB990767-01 Fixing of the hub
G05376061
 MB991618
Hub bolt remover		 General service tool Removal of the hub bolt
G05376062
 MB991897 or MB992011
Ball joint remover		 MB991113-01, MB990635-01 or General service tool Knuckle and tie rod end ball joint disconnection
NOTE: Steering linkage puller (MB990635 or MB991113)is also used to disconnect knuckle and tie rod end ball joint.
G05376063
 MB990241
Axle shaft puller
  1. MB990242

    Puller shaft

  2. MB990244

    Puller bar

 MB990241-01 or General service tool Removal of the driveshaft
G05102601
 MB991354
Puller body		 General service tool
G07044027
 MB991056 or MB991355
Knuckle arm bridge		 MB991056-01
  • Removal of the hub
  • Removal of the wheel bearing
G05432045
 MB992250
Knuckle arm bridge attachment		 - Removal of the hub
NOTE: Replace this attachment with a guide of MB991355 and use them.
G07044029
 MB991172
Inner shaft installer base		 - Press-fitting of the inner shaft
G05376066
  1. MB991017
  2. MB990998
  3. MB991000

A, B: Front hub remover and installer
C: Spacer		 MB990998-01
  • Removal of the hub
  • Provisional holding of the wheel bearing
  • Measurement of hub starting torque
  • Measurement of wheel bearing end play
    NOTE: MB991000, which belongs to MB990998, should be used as a spacer.
  • Removal of the wheel bearing inner race (outside) (Use MB991000 with MD998801.)
G05376067
 MB991099
Oil seal installer guide		 - Measurement of hub starting torque
G04871584
 MB990326
Preload socket		 General service tool
G05375622
 MB990810
Side bearing puller		 General service tool Removal of the center bearing bracket
G07044034
 MD998801
Remover		 - Removal of the wheel bearing inner race (outside)
G07044035
 MB992150
Oil seal installer		 - Installation of the wheel bearing inner race (outside)
G07044036
 MD998812
Installer cap		 -
G07044037
 MD998813
Installer		 -
G04872136
 MB990925
Bearing and oil seal installer set		 MB990925-01 or General service tool
  • Removal of the wheel bearing
  • Removal and installation of the center bearing
  • Press-fitting of the dust seal outer, inner
G05376074
 MB991388
Bush remover base		 - Press-fitting of the dust cover
G05376075
 MB991576
Base		 -
G05376076
 MB990890
Rear suspension bushing base		 MB990890-01
  • Installation of the wheel bearing
  • Press-fitting of the dust seal outer, inner
G05432059
 MB991248
Inner shaft remover		 MD998348-01 Removal of the inner shaft
G07044043
 MD999528
Adapter		 - Installation of the wheel bearing
G05376480
 MB991561
Boot band crimping tool		 MB991561 BJ boot (resin boot) band installation
G05432062
 MD998369
Bearing installer		 - Press-fitting of the seal plate

MB990925 BEARING AND OIL SEAL INSTALLER SET 

MB990925 BEARING AND OIL SEAL INSTALLER SET

Tool Type Tool number O D mm (in)
G07044046
 A MB990926 39.0 (1.54)
MB990927 45.0 (1.77)
MB990928 49.5 (1.95)
MB990929 51.0 (2.00)
MB990930 54.0 (2.13)
MB990931 57.0 (2.24)
MB990932 61.0 (2.40)
MB990933 63.5 (2.50)
MB990934 67.5 (2.66)
MB990935 71.5 (2.81)
MB990936 75.5 (2.97)
MB990937 79.0 (3.11)
B MB990938 -
C MB990939 -
About FixVault