Section 36 (Controller Area Network (Can))
WARNING: This page is about a different car, the 2012 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Special Tools
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Table
- Can-Related Connector Position
- Can Bus Diagnostics
- DIAGNOSTIC ITEM 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU
- DIAGNOSTIC ITEM 2: Malfunction of the ETACS-ECU
- DIAGNOSTIC ITEM 3: Abnormal short between the CAN-C bus lines
- DIAGNOSTIC ITEM 4: Diagnose shorts in the ground to CAN-C bus line
- DIAGNOSTIC ITEM 5: Diagnose shorts in the power supply to CAN-C bus line
- DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by AWD-ECU < Electronic controlled AWD >
- DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by AWC-ECU < S-AWC >
- DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor < Vehicles with ASC >
- DIAGNOSTIC ITEM 9: Diagnose when the scan tool cannot receive the data sent by TCM < CVT, A/T >
- DIAGNOSTIC ITEM 10: Diagnose when the scan tool cannot receive the data sent by ASC-ECU < vehicles with ASC >
- DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by ECM
- DIAGNOSTIC ITEM 12: Diagnose the lines between the ETACS-ECU and joint connector (CAN2)
- DIAGNOSTIC ITEM 13: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3)
- DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by combination meter
- DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by KOS-ECU < vehicles with KOS >
- DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by WCM < vehicles without KOS >
- DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by SRS-ECU
- DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU
- DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by A/C-ECU
- DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by radio and CD player < vehicles with radio and CD player > or radio and CD changer < vehicles with radio and CD changer >
- DIAGNOSTIC ITEM 21: Diagnose when the scan tool cannot receive the data sent by CAN box unit < vehicles with MMCS >
- DIAGNOSTIC ITEM 22: Diagnose when the scan tool cannot receive the data sent by satellite radio tuner < vehicles with satellite radio >
- DIAGNOSTIC ITEM 23: Short to power supply or ground in both CAN_H and CAN_L lines of the CAN-B bus lines
- DIAGNOSTIC ITEM 24: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1)
- DIAGNOSTIC ITEM 25: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines
- Can Communication-Related DTC (U-Code) Chart