FixVault
Home › Mitsubishi › 2013 › RVR ES › Repair and Diagnosis › Restraints › Passive Restraints › Interior › Special Tool

Special Tool

SPECIAL TOOL

Tool Tool number and name Supersession Application
G07049299
 MB990784 Ornament remover Removal of switches and trims
G05105023
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

Scan tool (M.U.T.-III sub assembly)
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Daimler Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T.-III trigger harness
 MB991824-KIT
NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle.
Diagnostic trouble code or service data check.
G05384141
 MB991223 Harness set
  1. MB991219 Test harness
  2. MB991220 LED harness
  3. MB991221 LED harness adapter
  4. MB991222 Probe
 General service tools Continuity check and voltage measurement at harness wire or connector
  1. Connector pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection
G07049326
 MB992006 Extra fine probe General service tool Continuity check and voltage measurement at harness wire or connector
About FixVault