Customization Function
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
By operating the scan tool (M.U.T.-III) ETACS system, the following functions can be customized. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool display) | Adjustment item | Adjusting content (scan tool display) | Adjusting content |
|---|---|---|---|
| Dome light delay timer with door | Adjustment of interior light delay shutdown time | 0 sec. | 0 second (no delay shutdown time) |
| 7.5 sec. | 7.5 seconds | ||
| 15 sec. | 15 seconds | ||
| 30 sec. | 30 seconds (initial condition) | ||
| 60 sec. | 60 seconds | ||
| 120 sec. | 120 seconds | ||
| 180 sec. | 180 seconds | ||
| Interior light auto cut timer | Adjustment of interior light automatic shutdown function operation time | Disable | No function |
| 3 min | 3 minutes | ||
| 30 min | 30 minutes (initial condition) | ||
| 60 min | 60 minutes |