Door & Window - With Diagnostics - Lancer Evolution
- Specification(S)
- Central Door Locking System Diagnosis
- Symptom Procedures - Central Door Locking System
- INSPECTION PROCEDURE 1: Central Door Locking System does not work at All
- INSPECTION PROCEDURE 2: Central Door Locking System does not Operate even when Door Lock Switch of Power Window Main Switch Operated (Door Lock Switch of Front Power Window Sub Switch Operate Normally)
- INSPECTION PROCEDURE 3: Central Door Locking System does not Operate even when Door Lock Switch of Front Power Window Sub Switch Operated (Door Lock Switch of Power Window Main Switch Operate Normally)
- INSPECTION PROCEDURE 4: A Door cannot be Locked or Unlocked by the Central Door Locking System
- INSPECTION PROCEDURE 5: Selector "P" Position-linked Door Unlock Function does not Operate Normally. < TC-SST >
- INSPECTION PROCEDURE 6: Ignition "LOCK (OFF)" Position-linked Door Unlock Function does not Operate. < M/T, CVT, TC-SST >
- Power Window Diagnosis
- Diagnostic Trouble Code Procedures - Power Window
- Symptom Procedures - Power Window
- INSPECTION PROCEDURE 1: Power Windows do not work at All
- INSPECTION PROCEDURE 2: Driver's Power Window does not work by means of the Power Window Main Switch
- INSPECTION PROCEDURE 3: Relevant Power Window(s) does not work by means of the Front and Rear Passenger's Power Window Sub Switches
- INSPECTION PROCEDURE 4: Front and/or Rear Passenger's Power Window(s) do not work by means of the Power Window Main Switch
- INSPECTION PROCEDURE 5: The Power Window Timer Function does not work Normally
- INSPECTION PROCEDURE 6: Power Window Anti-trap Function does not work Normally. < Driver's side only >
- INSPECTION PROCEDURE 7: The Window Glass Lowers Automatically while it is Rising < Driver's Side Only >
- Check At Ecu Terminal
- Door Diagnosis
- Symptom Procedures
- INSPECTION PROCEDURE 1: Water Leak Through Door Window Glass
- INSPECTION PROCEDURE 2: Door Window Glass Malfunction
- INSPECTION PROCEDURE 3: Water Leak Through Door Edge
- INSPECTION PROCEDURE 4: Water Leak from Door Center
- INSPECTION PROCEDURE 5: Door Hard to Open
- INSPECTION PROCEDURE 6: Door does not Open or Close Completely
- INSPECTION PROCEDURE 7: Uneven Gap Between Body
- INSPECTION PROCEDURE 8: Wind Noise Around Door
- How To Locate Wind Noise
- Special Tools
- On-Vehicle Service
- Door Fit Adjustment
- Door Window Glass Adjustment
- Power Window Check
- Glass Sliding Mechanism Check And Adjustment
- Power Window Safety Mechanism Check < Driver's Side Only >
- Power Window Timer Function Check
- Power Window Operating Current Check
- Learning Procedures Of The Power Window Fully Closed Position < Driver's Side Only >
- Central Door Locking System Check
- Check Of Key Lock Prevention Function
- Shift "P" Interlink Door Unlock Function Check < TC-SST >
- Ignition "Lock (Off)" Position-Linked Door Unlocking Function Check < M/T, TC-SST >
- Door Outside Handle Play Check
- Door Inside Handle Check
- Customization Function
- Door Assembly
- Door Glass And Regulator
- Door Handle And Latch
- Window Glass RUNCHANNEL And Door Opening Weatherstrip
- PROTECTOR FILM - Vehicles without side air dam