Transaxle Oil Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the filler plug and gasket.
Remove the drain plug and gasket, and drain the oil.
Tighten the drain plug and new gasket, to the specified torque.
Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb)
Fill with Mitsubishi Motors Genuine NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.
Quantity: 2.5 dm ³ (2.6 quarts)

Fig 1: Identifying Transaxle Oil Filler And Drain Plug
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Tighten the filler plug and new gasket to the specified torque.
Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb)

Fig 2: Identifying Transaxle Oil Filler And Drain Plug
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.