FixVault
Home › Mitsubishi › 2016 › Lancer SE › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle On-Vehicle Service › Diagnosis › Road Test

Road Test

Steps Conditions for test/operation Test/Operation Judgment standard Check item Diagnostic trouble code number Checking procedure in case of error
1 Ignition switch: LOCK (OFF) Ignition switch (1) ON Data list No. 6
(1) Battery positive voltage		 ECU power supply - Malfunction of TCM power supply system
Data list No. 7
(1) Battery positive voltage		 Solenoid supply voltage P1607 Malfunction of system power supply
The relevant diagnostic trouble code is not detected. Variant coding U1197, U1415, U1417 Malfunction of the coding
The relevant diagnostic trouble code is not detected. EEPROM P1637 Malfunction of memory backup
2 Ignition switch: ON
Engine: Stopped		 Selector lever position
  1. P
  2. R
  3. N
  4. D
  5. L <Vehicles without sport mode>
  6. Sport mode <Vehicles with sport mode>
 Data list No. 72
(1) P (2) R (3) N (4) D (5) L		 Transmission range switch P0705 Malfunction of transmission range switch
Data list No. 60
(1) ON (2) OFF
(3) OFF (4) OFF
(5) OFF (6) OFF
Data list No. 61
(1) OFF (2) ON
(3) OFF (4) OFF
(5) OFF (6) OFF
Data list No. 62
(1) OFF (2) OFF
(3) ON (4) OFF
(5) OFF (6) OFF
Data list No. 63
(1) OFF (2) OFF
(3) OFF (4) ON
(5) OFF (6) OFF
Data list No. 73
(1) OFF (2) OFF
(3) OFF (4) OFF
(5) ON (6) OFF
Data list No. 64
(1) OFF (2) OFF
(3) OFF (4) OFF
(5) OFF (6) ON
2 Ignition switch: ON
Engine: Stopped <Vehicles with sport mode>		 Paddle shift lever position
  1. Pull the paddle shift (+) (right side) toward you and hold.
  2. Release the lever
 Data list No. 67
(1) ON
(2) OFF		 Paddle shift UP switch P0815 Malfunction of paddle shift switch
Paddle shift lever position
  1. Pull the paddle shift (-) (left side) toward you and hold.
  2. Release the lever
 Data list No. 68
(1) ON
(2) OFF		 Paddle shift DOWN switch P0816
Selector lever position
  1. P
  2. Select sport mode
  3. Upshift and hold
  4. Downshift and hold
 Data list No. 64
(1) OFF (2) ON
(3) ON (4) ON		 Select switch (Manual mode switch) P0826 Malfunction of shift switch assembly
Data list No. 65
(1) OFF (2) OFF
(3) ON (4) OFF		 Up switch
Data list No. 66
(1) OFF (2) OFF
(3) OFF (4) ON		 Down switch
3 Ignition switch: ON
Engine: Stopped Selector lever position: P		 Accelerator pedal
  1. Fully closed
  2. Depressed
  3. Fully opened
 Data list No. 15
(1) 0%
(2) Gradually increases from (1)
(3) 100%		 APS - -
Brake pedal
  1. Depressed
  2. Released
 Data list No. 59
(1) ON
(2) OFF		 Stoplight switch P0703 Malfunction of stoplight switch
4 Ignition switch: START Perform the starting test in the P or N position Engine can be started Can the engine start? - Malfunction of engine system
5 Engine warming up Drive the vehicle for 15 minutes or more to raise the transmission fluid temperature to 45 to 100°C (113 to 212°F) Data list No. 5
Voltage drops gradually		 Transmission fluid temperature sensor P0712, P0713 Malfunction of transmission fluid temperature sensor
Data list No. 22
Fluid temperature rises gradually
The relevant diagnostic trouble code is not detected. P0711
The relevant diagnostic trouble code is not detected. G sensor P1798 Malfunction of G sensor
The relevant diagnostic trouble code is not detected. Brake fluid pressure sensor P1799 Malfunction of brake fluid pressure signal
The relevant diagnostic trouble code is not detected. ABS/ASC P1773 Malfunction of ABS/ASC
6 Engine: Idling Selector lever position: P
Accelerator pedal: Fully closed		 Data list No. 11
600 to 900 r/min		 Engine revolution - Malfunction of engine system
Selector lever position: N Data list No. 42
0 to 0.8 A		 Line pressure solenoid valve P0962, P0963 Malfunction of line pressure solenoid valve
Data list No. 2
0.2 to 0.7 V		 Primary pressure sensor P0847, P0848 Malfunction of primary pressure sensor
Data list No. 3
1.4 to 1.9 V		 Secondary pressure sensor P0842, P0843 Malfunction of secondary pressure sensor
Data list No. 46
0 to 0.8 A		 Secondary pressure solenoid valve P0776, P0966, P0967 Malfunction of secondary pressure solenoid valve
Data list No. 21
1.0 to 1.2 MPa (145 to 174 psi)
Data list No. 48
Approx. 1.0 A		 Select pressure solenoid valve P2720, P2721 Malfunction of select pressure solenoid valve
7 Selector lever position: D Stop the vehicle (depress the brake pedal) Data list No. 13
Pulley gear ratio: less than 2.62		 Gear ratio P0730 Incorrect gear ratio
Data list No. 48
0.6 to 0.9 A (The displayed value is different from the one for N range)		 Select pressure solenoid valve P2720, P2721 Malfunction of select pressure solenoid valve
During driving (at approx. 20 km/h (12 mph)) Data list No. 20
0.2 to 0.6 MPa (29 to 87 psi)
Data list No. 21
0.2 to 0.6 MPa (29 to 87 psi)		 Primary pressure sensor and secondary pressure sensor P084A Abnormality in fluid pressure sensor function
Data list No. 44
0.7 to 0.9 A		 Primary pressure solenoid valve P0969, P0970, P0971 Malfunction of primary pressure solenoid valve
Data list No. 20
0.2 to 0.6 MPa (29 to 87 psi)
Data list No. 1
Speed detected: more than 0 r/min (nearly the same as the turbine speed)		 Primary pulley speed sensor P0715 Malfunction of primary speed sensor
Stop the vehicle, and then accelerate to 60 km/h (37 mph) on a level road Data list No. 40
0.4 to 0.6 A		 Lock-up solenoid valve P0741, P2763, P2764 Malfunction of the lock-up solenoid valve
Data list No. 12
Amount of slippage: less than 15 r/min
Data list No. 8
Speed detected: more than 0 r/min (nearly the same as the tachometer)		 Turbine speed sensor P2765 Malfunction of turbine speed sensor
Data list No. 10
Approx. 48 x Vehicle speed (speedometer display)		 Secondary speed sensor P0720 Malfunction of secondary speed sensor
Data list No. 13
Pulley gear ratio: 0.3 to 2.7
About FixVault