FixVault
Home › Mitsubishi › 2016 › Lancer SEL › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transaxle On-Vehicle Service › On-Vehicle Service › Shift Lock Mechanism Check › Component Parts Check › Shift Lock Solenoid

Shift Lock Solenoid

  1. Measure the resistance between terminal No. 3 and No. 7 of the selector lever assembly connector.

    Standard value: 24  ± 1.2  Ω

  2. When the resistance is outside the standard value, replace the selector lever assembly.
Fig 1: Selector Lever Assembly Connector Terminals
G05375820Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
About FixVault