How To Read Data List

WARNING: This page is about a different variant/trim than selected.

Required Special Tools:

MB992744: Vehicle communication interface-Line (V.C.I.-Line)
MB992745: V.C.I.-Line main harness A (for vehicle with CAN communication)
MB992747: V.C.I.-Line USB cable short
MB992748: V.C.I.-Line USB cable long
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: Vehicle Communication Interface (V.C.I.)
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A (Vehicles with CAN communication system)

CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.

Connect the scan tool MB991958 to the data link connector.
Turn the ignition switch to the "ON" position.
Select "Interactive Diagnosis" from the start-up screen.
Select "System Select."
Select "AWD" from "System List," and press the "OK" button.
Select "Data List."
Choose an appropriate item and select the "OK" button.