FixVault

Data List Reference Table

CAUTION:
  • Road test always needs two people: one driver and one observer.
  • When shifting the selector lever to "D" position the brakes should be applied so that the vehicle does not move forward.
Item No. Scan tool (M.U.T.-III) display (Check item) Check condition Normal condition
4 Vehicle speed
(Vehicle speed signal)
Road test the vehicle. The speedometer and scan tool (M.U.T.-III) display the same value.
57 Cancel code
(Cancel code)
Ignition switch: "ON" The cancel code, which set when the cruise control system was cancelled at the last time, is set again.
74 Brake light switch
[Stoplight switch (for stoplight circuit)]
Ignition switch: "ON" Brake pedal: Depressed ON
Brake pedal: Released OFF
75 Cancel switch
[Cruise control switch (CANCEL switch)]
Ignition switch: "ON" CANCEL switch: Pressed ON
CANCEL switch: Released OFF
78 Clutch pedal position switch
(Clutch switch) <M/T>
Ignition switch: "ON" Clutch pedal: Depressed ON
Clutch pedal: Released OFF
81 Cruise control
(Cruise control operation)
Cruise control: active ON
Cruise control: Inactive OFF
86 Main switch
[Cruise control switch (Cruise control ON/OFF switch)]
Ignition switch: "ON" Cruise control ON/OFF switch: Pressed ON
Cruise control ON/OFF switch: Released OFF
88 Neutral switch (A/Cruise)
(Transmission range switch) <CVT>
Ignition switch: "ON" Selector lever: "N" or "P" range ON
Selector lever: Other than "N" or "P" range OFF
89 Normally closed brake switch
[Brake switch (for cruise control circuit)]
Ignition switch: "ON" Brake pedal: Depressed ON
Brake pedal: Released OFF
91 Resume switch Cruise control switch
(RES + switch)
Ignition switch: "ON" RES + switch: Pressed ON
RES + switch: Released OFF
92 Set switch Cruise control switch
(SET - switch)
Ignition switch: "ON" SET - switch: Pressed ON
SET - switch: Released OFF