Removal And Installation
CAUTION:
When the knock sensor is replaced, initialize the learned value using scan tool (M.U.T.-III) (Refer to
INITIALIZATION PROCEDURE FOR LEARNING VALUE IN MFI ENGINE
).
Pre-removal Operation
- Engine Room Under Cover Front Removal (Refer to UNDER COVER ).
- Oil Filter Removal (Refer to OIL FILTER REPLACEMENT ).
- Oil Filter Cover Removal (Refer to OIL PAN AND TIMING CHAIN CASE ).
Post-installation Operation
- Oil Filter Cover Installation (Refer to OIL PAN AND TIMING CHAIN CASE ).
- Oil Filter Installation (Refer to OIL FILTER REPLACEMENT ).
- Engine Room Under Cover Front Installation (Refer to UNDER COVER ).
For the removal and installation procedures, refer to WATER HOSE AND PIPE .
NOTES