| Transaxle |
| Reverse shift arm bracket assembly mounting bolt |
17 ± 3 (13 ± 2 ft-lb) |
| Shift & select link mounting bolt |
18 ± 5 (13 ± 3 ft-lb) |
| Speed sensor mounting bolt <without ABS> |
10 ± 2 (89 ± 17 in-lb) |
| Fork shaft Shift fork mounting bolt |
16 ± 2 (12 ± 1 ft-lb) |
| Transaxle case |
30 ± 5 (22 ± 3 ft-lb) |
| Shift & select lever shaft assembly |
18 ± 5 (13 ± 3 ft-lb) |
| Rock ball assembly |
37 ± 11 (27 ± 8 ft-lb) |
| Reverse idler gear shaft mounting bolt |
30 ± 8 (22 ± 5 ft-lb) |
| Drain plug |
39 ± 11 (29 ± 8 ft-lb) |
| Back-up light switch |
41 ± 11 (30 ± 8 ft-lb) |
| Harness bracket bolt |
11 ± 3 (97 ± 26 in-lb) |
| Cable bracket mounting bolt |
18 ± 5 (13 ± 3 ft-lb) |
| Neutral position switch <with ABS> |
34 ± 5 (25 ± 3 ft-lb) |
| Selection bell crank mounting bolt |
19 ± 3 (14 ± 2 ft-lb) |
| Control housing |
| Oil protect plate mounting bolt |
17 ± 5 (13 ± 3 ft-lb) |
| Differential |
| Differential ring gear |
124 ± 7 (91 ± 5 ft-lb) |