Option Coding
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
- With the ETACS functions being customized, if any of the ETACS-ECU option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.
The ETACS-ECU option coding data can be checked or changed by operating scan tool (M.U.T.-III).
- How to check option coding data
- Connect the scan tool (M.U.T.-III). Refer to CODING LIST .
- Select "ETACS" on the system selection screen.
- Select "Coding".
- Select "Option Coding Information".
- Check the displayed option coding information.
- How to change option coding data
- Connect the scan tool (M.U.T.-III) Refer to CODING LIST .
- Select "ETACS" on the system selection screen.
- Select "Coding".
- Select "Option Coding".
- Change to correct option coding data.
PART NAME LIST
| Item name |
|---|
| Auto light control |
| Keyless entry |
| RLS |
| Compressor type |
| Front fog light |
| Rear fog light |
| Manner Switch |
| Remote engine starter |
| DRL function |
| Wiper washer check valve |
| ESS Cancel Function |
| Panic Alarm |
| Answer back operation time |