FixVault

Cruise Control Setting

  1. Turn the ignition switch to the "ON" position.
  2. Push the cruise control ON/OFF switch (cruise control system: ON, cruise control indicator light: illuminated).
  3. Drive at the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the SET - switch.
  5. Check to be sure that when the SET - switch is released the speed is the desired constant speed.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (10 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed is decelerated to the low speed limit [approximately 40 km/h (25 mph)] or less, the constant speed driving will be cancelled even if the vehicle speed is not decelerated 15 km/h (10 mph) or more from the set speed.
    G11278031Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.