Backup Battery
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backup battery (2) to the EAM (1) and connect the positive battery connector first, then connect the negative battery connector.
- Gently insert the backup battery (2) into the EAM (1).
- Install the backup battery cover (3).
- Install the EAM into the vehicle. Refer to MODULE, EMERGENCY ASSISTANCE (EAM), INSTALLATION and MODULE, GLOBAL TELEMATICS BOX, INSTALLATION .
- Start the engine and check if "Service Required" indicator or message on the Instrumental Panel Cluster (IPC) turns off.