FixVault
Home › Mitsubishi › 2019 › RVR ES, Standard Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 12 (Electronic Control (AWD)) › Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
Tool Tool number and name Supersession Application
G06244449Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III Sub Assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB Cable
  3. M.U.T.-III Main Harness A (Vehicles with CAN communication system)
  4. M.U.T.-III Main Harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Chrysler models only)
  6. M.U.T.-III Adapter Harness
  7. M.U.T.-III Trigger Harness
 MB991824-KIT
NOTE: .G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Check of the electronic control AWD (the diagnostic trouble code display, service data display, freeze frame data display, actuator test with scan tool)
G09625236Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991223
Harness set
  1. MB991219 Test harness
  2. MB991220 LED harness
  3. MB991221 LED harness adapter
  4. MB991222 Probe
 MB991223 Continuity check and voltage measurement at the AWD-ECU wiring harness connector
G08294095Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992006
Extra fine probe		 General service tool
About FixVault