Electrical Parking Switch Check
Observe the following chart to check the electric parking switch. If defective, replace the sift indicator panel.
| Terminal number | Item | Electrical parking switch operation | *Normal conditions | |
|---|---|---|---|---|
| Continuity (Resistance) | Illumination/extinction | |||
| 4 - 5 | Electrical parking switch (main) | Don not press the switch | Continuity exists (150 - 170 Ω) | - |
| Press and hold the switch | Continuity exists (5.9 - 6.6 kΩ) | - | ||
| Terminal number | Item | Electrical parking switch operation | *Normal conditions | |
|---|---|---|---|---|
| Continuity (Resistance) | Illumination/extinction | |||
| 6 - 7 | Electrical parking switch (sub) | Don not press the switch | Continuity exists (5.9 - 6.6 kΩ) | - |
| Press and hold the switch | Continuity exists (150 - 170 Ω) | - | ||
| 1 - 4 | Indicator | No continuity | Connect the connector to the electric parking switch. When the power supply mode of the electric motor switch is on or the ready indicator illuminates, the indicator must illuminate. Connect the connectors to the electric parking switch and the selector lever assembly. When the power supply mode of the electric motor switch is turned on with the brake pedal depressed and the selector lever is tilted towards N position, the indicator must go out. |
|
| 3 - 8 | Illumination | - | No continuity | Connect the connector to the electric parking switch. When the taillight illuminate, "P" must illuminate. |