FixVault

Fail-Safe Functions

When the electric parking brake ECU detects any malfunction in the system, the ECU will activate the brake warning light, the electric parking brake warning light and the electric parking brake switch indicator light to inform the driver that the electric parking brake is disabled.

In addition, the ECU displays a warning notice on the multi-information display in the combination meter.

ILLUMINATION CONDITION OF WARNING LIGHT, INDICATOR LIGHT AND MULTI INFORMATION DISPLAY IN CASE OF FAILURE

DTC No. Inspection item Brake warning light Electric parking brake warning light Multi information display Electric parking brake switch indicator light
C1607 ECU failure OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C1707 Implausible coding data OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C1861 Power supply low voltage Flash (1 Hz) OFF - Flash (1 Hz)
C2253 EPB SW malfunction Flash (1 Hz)(1) ON PARKING BRAKE SERVICE REQUIRED Flash (1 Hz)(1)
C2254 IG SW malfunction OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C2300 Left actuator malfunction Flash (1 Hz) ON PARKING BRAKE SERVICE REQUIRED Flash (1 Hz)
C2301 Right Actuator malfunction Flash (1 Hz) ON PARKING BRAKE SERVICE REQUIRED Flash (1 Hz)
C2302 Left Motor malfunction OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C2303 Right Motor malfunction OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C2304 Left +B voltage malfunction OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
C2305 Right +B voltage malfunction OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U0121 ABS/ASC CAN timeout OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U0141 ETACS CAN timeout OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U0415 ABS/ASC (CAN message) OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U1010 PHEV ECU Parity/Toggle bit error OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U1073 Bus-off OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U110A PHEV-ECU CAN timeout OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
U1195 Coding not completed OFF(4) ON PARKING BRAKE SERVICE REQUIRED OFF(4)
- The power supply voltage is abnormal(2). Flash (1 Hz) OFF - Flash (1 Hz)
- The system detects a continuous operation of the electric parking brake (to protect the electric motor from overheat)(3). Flash (1 Hz) OFF PARKING BRAKE TEMPORARILY NOT AVAILABLE Flash (1 Hz)
- The system detects that the electric parking brake is engaged poorly (the vehicle moves) continuously. Flash (1 Hz) OFF - Flash (1 Hz)
NOTE:
  • (1) The light will flash if all of the four apply and release circuits for the electric parking brake switch are open.
  • (2) The power supply voltage is high or excessively low.
  • (3) If you operate the electric parking brake switch repeatedly in a short period of time, a warning screen will be displayed and the electric parking brake may be disabled temporarily. In this case, you have to wait for approx. one minute after the warning screen disappears until the switch can be operated.
  • (4) illuminates according to the status of the electric parking brake.
UNDER APPLY, RELEASE AND EMERGENCY BRAKE(1) IN CASE OF FAILURE

DTC No. Inspection item Apply Release(2) Emergency brake (ASC)(3) Emergency brake (EPB)(4)
C1607 ECU failure Enabled(5) Enabled(5) Enabled(5) Enabled(5)
C1707 Implausible coding data Enabled Enabled Enabled Enabled
C1861 Power supply low voltage Prohibited Prohibited Enabled Prohibited
C2253 EPB SW malfunction Prohibited Prohibited(6)/Enabled(7) Enabled Prohibited(7)/Enabled(6)
C2254 IG SW malfunction Enabled Enabled Enabled Enabled
C2300 Left actuator malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
C2301 Right Actuator malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
C2302 Left Motor malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
C2303 Right Motor malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
C2304 Left +B voltage malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
C2305 Right +B voltage malfunction Enabled(8) Enabled(8) Enabled(8) Enabled(8)
U0121 ABS/ASC CAN timeout Prohibited Enabled Prohibited Enabled(9)
U0141 ETACS CAN timeout Enabled Enabled Enabled Enabled
U0415 ABS/ASC (CAN message) Enabled(9) Enabled Enabled(9) Enabled(9)
U1010 PHEV ECU Parity/Toggle bit error Enabled Enabled Enabled Enabled
U1073 Bus-off Prohibited Enabled(12) Prohibited Enabled(9)
U110A PHEV-ECU CAN timeout Enabled Enabled Enabled Enabled
U1195 Coding not completed Enabled Enabled Enabled Enabled
- The power supply voltage is abnormal(10). Prohibited Prohibited Prohibited Prohibited
- The system detects a continuous operation of the electric parking brake (to protect the electric motor from overheat) (11) Prohibited Enabled Enabled Enabled(4)
- The system detects that the electric parking brake is engaged poorly (the vehicle moves) continuously. Enabled Enabled Enabled Prohibited
NOTE:
  • (1) The emergency brake will be activated when the brake pedal depression is not enough to decelerate the vehicle.
  • (2) The electric parking brake switch is operated or the automatic operation works.
  • (3) The ASC-ECU has applied the emergency brake hydraulically.
  • (4) Just in case the ASC-ECU cannot apply the parking brake hydraulically, the electric parking brake ECU applies the emergency brake instead.
  • (5) The ECU controls the system when possible.
  • (6) The release circuit of the electric parking brake switch fails.
  • (7) The apply circuit of the electric parking brake switch fails.
  • (8) The electric parking brake actuator, which corresponds to the DTC, is disabled.
  • (9) The system applies the emergency brake when vehicle speed signal is invalid.
  • (10) The power supply voltage is high or excessively low.
  • (11) If you operate the electric parking brake switch repeatedly in a short period of time, a warning screen will be displayed and the electric parking brake may be disabled temporarily. In this case, you have to wait for approximately one minute after the warning screen disappears until the switch can be operated.
  • (12) "Prohibited" when the ECU receives an invalid master cylinder fluid pressure sensor value or an invalid selector lever position.