FixVault
Home › Mitsubishi › 2021 › Outlander PHEV LE › Repair and Diagnosis › External Pages › Different car › Section 83 (Cruise Control) › On-Vehicle Service › Cruise Control Switch Check › Speed-Reduction Setting

Speed-Reduction Setting

WARNING: This page is about a different car, the 2020 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn on the power supply mode of the electric motor switch.
  2. Push the cruise control ON/OFF switch (cruise control display screen: display).
  3. Set to the desired speed within the range of approximately 40 km/h (25 mph) or more.
  4. Push the SET - switch.
  5. Check to be sure that deceleration continues while the SET - switch is pushed, and that the speed at the time it was released becomes the constant driving speed.
About FixVault