| 1 |
B+B |
ECU power supply (battery) |
Always |
Battery positive voltage |
| 2 |
IG1 |
ECU power supply (Ignition switch: IG1) |
Ignition switch: ON |
Battery positive voltage |
| Ignition switch: OFF |
1 V or less |
| 3 |
MODE |
Multi information display switch input |
Multi information display switch: ON |
1 V or less |
| Multi information display switch: OFF |
Battery positive voltage |
| 4 |
- |
- |
- |
- |
| 5 |
SBDS |
Seat belt switch (driver's side) input |
Seat belt switch (driver's side): ON |
1 V or less |
| Seat belt switch (driver's side): OFF |
Battery positive voltage |
| 6 |
SECU |
Theft-alarm indicator |
Theft-alarm indicator: ON |
1 V or less |
| Theft-alarm indicator: OFF |
System voltage |
| 7 to 12 |
- |
- |
- |
- |
| 13 |
GND |
Ground (sensor) |
Always |
1 V or less |
| 14 |
CANH |
CAN-C-Mid_H |
- |
- |
| 15 |
CANL |
CAN-C-Mid_L |
- |
- |
| 16, 17 |
- |
- |
- |
- |
| 18 |
F/G |
Input of fuel gauge |
Fuel: FULL |
Approximately 1 V |
| Fuel: EMPTY |
Approximately 8 V |
| 19 |
BWLP |
Seat belt reminder (passenger's side) indicator lamp output |
Seat belt switch (passenger's side): ON |
Battery positive voltage |
| Seat belt switch (passenger's side): OFF |
1V or less |
| 20 |
SPEED |
Vehicle speed signal output |
Vehicle speed: Approximately 40 km/h |
Approximately 28Hz |
| Vehicle speed change |
In accordance with the vehicle speed, a pulse is generated. |
| 21 |
GND1 |
Ground (ECU) |
Always |
1 V or less |
| 22 |
PWM |
Illumination (-) output |
With daytime lighting control |
1 V or less |
| With nighttime lighting control |
In accordance with the meter information switch operation, a pulse is generated. |
| 23 |
ILL+ |
Illumination (+) output |
With lighting control |
Battery positive voltage |
| Without lighting control |
1 V or less (Open) |
| 24 |
IL+P |
Illumination (power supply) |
Always |
Battery positive voltage |