Special Tools

Tool	Tool number and name	Supersession	Use
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992744 MB992745 MB992747 MB992748 M.U.T.-IIISE Vehicle communication interface-Lite (V.C.I.-Lite) V.C.I.-Lite main harness A (for vehicles with CAN communication) V.C.I.-Lite USB cable short V.C.I.-Lite USB cable long	-	CVT or S-AWC check (Diagnostic trouble code, data list)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992006 Extra fine probe	-	Continuity check and voltage measurement at harness wire or connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MD998330 (a: MD998331) Oil pressure gauge (3.0 MPa, 435 psi) (a: Joint)	MD998330-01	Hydraulic pressure measurement
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992127 Joint	-	Hydraulic pressure measurement
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB995062 Flushing tool	MLR-6906-C or Equivalent	Flushing cooler and tube
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992277 Clip remover	Tool not available	Disconnect the joint between the transaxle control cable and manual control lever
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992075 Handle	-	Use with oil seal installer
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992140 Oil seal installer	-	Installation of side oil seal
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992206 Oil seal installer	-	Installation of side oil seal <FWD>;
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992906 Engine hanger attachment	Tool not available	Engine assembly support during transaxle assembly removal and installation NOTE: Prepare two engine hanger attachments, MB992906.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB991895 Engine hanger	Tool not available
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB990784 Ornament remover	General service tool	Removal of transaxle control cable