Work Procedure

CAUTION: When performing the following operations, always use M.U.T.-III SE. (It cannot be performed by any means other than M.U.T.-III SE.)

Replacing ABS actuator and electric unit (control unit)

CHANGE OF SYSTEM MODE
With M.U.T.-III SE
1. Select "ABS", "WORK SUPPORT", and "SYSTEM MODE CHANGE" according to this order.
  CAUTION: Never operate the parking brake switch.
2. Select "Mode 1" and Touch "OK".
3. Check display item "Electric parking mode".
Is the inspection result "Mode 1"?

YES >>: GO TO 2 .

NO >>: Perform change of system mode again.
PERFORM THE SELF-DIAGNOSIS
With M.U.T.-III SE
1. Pull parking brake switch to activate electric parking brake.
2. Push parking brake switch to release electric parking brake.
3. Perform self-diagnosis for "ABS".
Is malfunction detected?

YES >>: Check the DTC. Refer to DTC INDEX .

NO >>: INSPECTION END