DTC Confirmation Procedure

TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON.

>>

GO TO 2 

1. Turn ignition switch ON and wait at least 10 second.
2. Turn ignition switch OFF and wait at least 10 seconds.
3. Repeat step  1 and  2 for 2 times.
4. Turn ignition switch ON.
5. Check the DTC.

Is the DTC detected? 

YES >>

Proceed to DTC DIAGNOSIS PROCEDURE .

NO-1 >>

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO-2 >>

Confirmation after repair: INSPECTION END