Work Procedure

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Contact backside of the registered Keyless operation key* to push-button ignition switch while brake pedal is depressed, then turn ignition switch ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Ignition switch OFF.
5. Check that the engine starts.
>>

GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Refer to Description DESCRIPTION .

>>

END