Work Procedure
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Always perform the side radar configuration after replacing the side radar.
- SIDE RADAR CONFIGURATION
Perform the side radar configuration with M.U.T.-III SE. Refer to WORK PROCEDURE .
>>
GO TO 2.
- SIDE RADAR ALIGNMENT
Perform the side radar alignment with M.U.T.-III SE. Refer to WORK PROCEDURE .
>>
GO TO 3.
- PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of side radar with M.U.T.-III SE. Check if any DTC is detected.
Is any DTC detected?
YES >>
Perform the trouble diagnosis for the detected DTC.
NO >>
INSPECTION END