FixVault
Home › Mitsubishi › 2022 › Outlander ES, AWD › Repair and Diagnosis › External Pages › Different car › Section 72 (Driver Assistance System) › Basic Inspection › Pre-Inspection For Diagnosis › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAMERA LENS AND WINDSHIELD 

    Are camera lens and windshield contaminated with foreign materials? 

    YES (When the camera lens is contaminated with foreign materials.) >>

    Replace front camera unit (Refer to REMOVAL AND INSTALLATION .) and

    GO TO  2.

    YES (When the windshield is contaminated with foreign materials.)>>

    Clean windshield.

    NO >>

    GO TO  2.

  2. CHECK FRONT CAMERA UNIT INSTALLATION CONDITION 

    Check front camera unit installation condition (installation position, properly tightened, a bent bracket).

    Is it properly installed? 

    YES >>

    GO TO  3.

    NO >>

    Install front camera unit properly, and perform camera aiming.

  3. CHECK VEHICLE HEIGHT 

    Check vehicle height. Refer to WHEEL ALIGNMENT .

    Is vehicle height appropriate? 

    YES >>

    INSPECTION END

    NO >>

    Repair vehicle to appropriate height.

About FixVault