Special Tools
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
|
- | ASC check (Diagnostic trouble code display, data list display and calibration by scan tool) | |
MB991958
|
MB991824-KIT
NOTE:
G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION:
M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle.
|
ASC check (Diagnostic trouble code display, data list display and calibration by scan tool) | |
| MB991997 | ASC check harness | Voltage inspection at ASC-ECU terminals | |
MB991223
|
General service tools | Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
|
|
| MB992006 Extra fine probe |
- | Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector. | |
| MB991709 Wiring harness set |
- | Output current measure at the wheel speed sensor |