FixVault

Work Support: Notes

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Function name Special Function items Description
ECU Information - Display the ECU Information number (part number etc.) of the selected system
Actuator Test -
  • Send the drive signal from M.U.T.-III SE to the actuator
  • The operation check can be performed
MAC KEY writing - Write MAC key to ADAS control unit 2
Steering torque calibration Steering torque calibration Start the steering torque calibration
NOTE:
  • Causes of the maximum five cancellations (system cancel) are displayed.
  • The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to 254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.