FixVault
Home › Mitsubishi › 2023 › Outlander PHEV ES › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › System Description › Operation › Vehicle-To-Vehicle Distance Control Mode Function › Operation Guidance › Switch Name And Function

Switch Name And Function

G16317164Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
No. Switch name Description
1 ACC MAIN switch ACC MAIN switch to activate the system (Press for less than 1.5 seconds)
2 CANCEL switch Pressing the switch cancels ACC control
3 RES+ switch Resumes set speed or increases speed incrementally
  • Push and hold the switch to increase the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to increase the set speed by 1 km/h (1 MPH)
4 SET- switch Sets desired cruise speed or reduces speed incrementally
  • Push and hold the switch to decrease the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to decrease the set speed by 1 km/h (1 MPH)
    NOTE: The minimum set speed is 30 km/h (20 MPH)
5 DISTANCE switch Changes the following distance from: Long, Middle, Short


G16317217Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
No. Switch name Description
1 IM PILOT Assist switch Turns the MI-PILOT Assist system ON/OFF (press for less than 1.5 seconds)
2 CANCEL switch Cancels MI-PILOT Assist when the switch is pressed
3 RES+ switch Resets to the previous set vehicle speed or increases the set speed in steps
  • Push and hold the switch to increase the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to increase the set speed by 1 km/h (1 MPH)
4 SET- switch Sets MI-PILOT Assist at a set speed, or reduces the speed progressively
  • Push and hold the switch to decrease the set speed by 5 km/h (5 MPH)
  • Push then quickly release the switch to decrease the set speed by 1 km/h (1 MPH)
    NOTE: The minimum set speed is 30 km/h (20 MPH)
5 DISTANCE switch Each press of the switch changes the vehicle distance setting between "Long", "Medium" or "Short."
About FixVault