Removal And Installation

Pre-removal Operation  Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Removal (Refer to Under Cover REMOVAL AND INSTALLATION ). Generator and Others Belt Removal (Refer to CRANKSHAFT PULLEY ).

Post-installation Operation  Generator and Others Belt Installation (Refer to CRANKSHAFT PULLEY ). Generator and Others Belt Tension Check (Refer to On-vehicle Service, GENERATOR AND OTHERS BELT TENSION CHECK ). Engine Room Under Cover Front A, B and Engine Room Side Cover (RH) Installation (Refer to Under Cover REMOVAL AND INSTALLATION ).

Fig 1: Removing/Installing Generator Assembly Components Location With Torque Specification

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Removal steps
1. Generator connector
2. Generator terminal
3. Generator bracket
4. Generator assembly