Keyless Entry System Inspection
WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
Check the system as described below. If the system does not work, carry out troubleshooting. Refer to TROUBLE SYMPTOM CHART .
- Operate the transmitter to check that the doors can be locked and unlocked.
- Operate the transmitter to check when the door locking or unlocking operation is performed that the hazard warning light lock: flash once, unlock: flash twice (default setting) and dome light lock: flash once, unlock: illuminates for 15 seconds (default setting) answer back operates. Refer to POWER DOOR LOCKS WITH SELECTIVE UNLOCKING INSPECTION <VEHICLES WITH ELECTRIC RETRACTABLE REMOTE CONTROLLED DOOR MIRRORS> .
NOTE:
- The customization function allows you to change the answerback setting as follows. Prior to that check, confirm which setting is activated.
- The hazard warning lights flash once when locked and twice when unlocked (default setting).
- The hazard warning lights flash once when locked and do not flash when unlocked.
- The hazard warning lights do not flash when locked and flash twice when unlocked.
- The hazard warning lights do not flash when both locked and unlocked.
- The hazard warning lights flash twice when locked and once when unlocked.
- The hazard warning lights flash twice when locked and do not flash when unlocked.
- The hazard warning lights do not flash when locked and flash once when unlocked.