Work Procedure
- REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to REMOVAL AND INSTALLATION .
Which is the vehicle specification?
With navigation system >>
GO TO 2.
Without navigation system >>
GO TO 4.
- VEHICLE SPECIFICATION RECOGNITION
- Connect battery negative terminal.
- Ignition switch ON and wait for 30 seconds or more.
NOTE: When the driver seat control unit receives a signal from the AV control unit for 30 seconds after the battery is energized, it is recognized and set as the specifications of with navigation system.>>
GO TO 3.
- LOG-IN STORING
Perform log-in storing. Refer to SYSTEM DESCRIPTION .
>>
GO TO 4.
- MEMORY STORING
Perform memory storing. Refer to DESCRIPTION .
Which is the vehicle specification?
With navigation system >>
WORK END
Without navigation system >>
GO TO 5.
- KEYLESS OPERATION KEY INTERLOCK STORING
Perform Keyless operation key interlock storing. Refer to DESCRIPTION .
>>
WORK END