Individual Function Within The System

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

• Motor
  • A 3-phase SR motor is used.
  • Coil is placed on the stator core around the motor and the current that passes through the coil in sequence generates the rotating force for the inner rotor core.
• Encoder
  • The Hall IC type rotation angle sensor is used for higher accuracy in the detection of the rotor rotation angle.
  • It detects the rotor rotation angle and outputs pulse signals to the electric shift control module.
  • The electric shift control module controls the timing of the current feed to the coils optimally based on the signal from the encoder.
• Actuator Reduction Gear

The actuator reduction gear consists of a cycloidal gear and includes a motor with its torque amplified for secure operation under high torque-requiring conditions.