DTC Confirmation Procedure

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
1. Pull the parking brake switch.
  NOTE: Check the parking brake switch indicator is turn On.
2. Electric motor switch OFF.
3. Get out of the vehicle and close all doors.
4. Wait 65 seconds.
NOTE:
- Check the parking brake switch indicator turn OFF.
- If the rear brake caliper is heated, wait an hour so that parking brake switch indicator does not turn OFF.
>>

GO TO 2.
DTC REPRODUCTION PROCEDURE
With M.U.T.-III SE
1. Electric motor switch ON.
2. Perform Diagnostic Trouble Code for "EPS/DAST 3".
Is DTC "U0076-00" detected?

YES >>

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

NO-1 >>

To check malfunction symptom before repair: Refer to Intermittent Incident INTERMITTENT INCIDENT .

NO-2 >>

Confirmation after repair: INSPECTION END