FixVault
Home › Mitsubishi › 2024 › Outlander PHEV ES › Repair and Diagnosis › External Pages › Different car › Section 161 (Cruise Control System) › Basic Inspection › Diagnosis And Repair Work Flow › Work Flow › Detailed Flow

Detailed Flow

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
  1. INTERVIEW FOR MALFUNCTION 

    It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

    NOTE: The customers are not professionals. Never assume that "maybe the customer means-" or "maybe the customer mentioned this symptom".

    >>

    GO TO  2.

  2. DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE) 
    1. Perform "Read All DTCs" with M.U.T.-III SE.
    2. Check if any DTC is detected in diagnostic trouble code results of "PHEV".

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  3.

  3. ACTION TEST 

    Perform the cruise control system action test to check the operation status. Refer to Work Procedure WORK FLOW .

    Check if any other malfunctions occur.

    >>

    GO TO  4.

  4. SYMPTOM DIAGNOSIS 

    Perform the applicable diagnosis according to the diagnosis chart by symptom.

    >>

    GO TO  6.

  5. TROUBLE DIAGNOSIS BY DTC 
    1. Check the DTC in the diagnostic trouble code results.
    2. Perform trouble diagnosis for the detected.

      >>

    GO TO  6.

  6. MALFUNCTIONING PART REPAIR 

    Repair or replace the identified malfunctioning parts.

    >>

    GO TO  7.

  7. REPAIR CHECK [DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE)] 
    1. Erases diagnostic trouble code results.
    2. Perform "Read All DTCs" again after repairing or replacing the malfunctioning parts.
    3. Check if any DTC is detected in diagnostic trouble code results of "PHEV".

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  8.

  8. REPAIR CHECK (ACTION TEST) 

    Perform the cruise control system action test. Check if the malfunction symptom is solved or no other symptoms occur.

    Is there any malfunction symptom? 

    YES >>

    GO TO  4.

    NO >>

    INSPECTION END



  1. INTERVIEW FOR MALFUNCTION 

    It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

    NOTE: The customers are not professionals. Never assume that "maybe the customer means-" or "maybe the customer mentioned this symptom".

    >>

    GO TO  2.

  2. DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE) 
    1. Perform "Read All DTCs" with scan tool (M.U.T.-III SE).
    2. Check if any DTC is detected in diagnostic trouble code results of "LASER/RADAR", "LANE CAMERA" and "ICC/ADAS 2".

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  3.

  3. ACTION TEST 

    Perform the ACC system action test to check the operation status. Refer to Work Procedure WORK FLOW .

    Check if any other malfunctions occur.

    >>

    GO TO  4.

  4. SYMPTOM DIAGNOSIS 

    Perform the applicable diagnosis according to the diagnosis chart by symptom.

    >>

    GO TO  6.

  5. TROUBLE DIAGNOSIS BY DTC 
    1. Check the DTC in the diagnostic trouble code results.
    2. Perform trouble diagnosis for the detected.
      • LASER/RADAR: Refer to DTC Index (DTC INDEX ).
      • LANE CAMERA: Refer to DTC Index (DTC INDEX ).
      • ACC/ADAS 2: Refer to DTC Index (DTC INDEX ).
      NOTE: If Network-DTC is detected, first diagnose the CAN communication system.

    >>

    GO TO  6.

  6. MALFUNCTIONING PART REPAIR 

    Repair or replace the identified malfunctioning parts.

    >>

    GO TO  7.

  7. REPAIR CHECK [DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE)] 
    1. Erases diagnostic trouble code results.
    2. Perform "Read All DTCs" again after repairing or replacing the malfunctioning parts.
    3. Check if any DTC is detected in diagnostic trouble code results of "LASER/RADAR", "LANE CAMERA" and "ICC/ADAS 2".
      • LASER/RADAR: Refer to DTC Index (DTC INDEX ).
      • LANE CAMERA: Refer to DTC Index (DTC INDEX ).
      • ACC/ADAS 2: Refer to DTC Index (DTC INDEX ).

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  8.

  8. REPAIR CHECK (ACTION TEST) 

    Perform the ACC system action test. Check if the malfunction symptom is solved or no other symptoms occur.

    Is there any malfunction symptom? 

    YES >>

    GO TO  4.

    NO >>

    INSPECTION END



  1. INTERVIEW FOR MALFUNCTION 

    It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

    NOTE: The customers are not professionals. Never assume that "maybe the customer means-" or "maybe the customer mentioned this symptom".

    >>

    GO TO  2.

  2. DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE) 
    1. Perform "Read All DTCs" with scan tool (M.U.T.-III SE).
    2. Check if any DTC is detected in diagnostic trouble code results of "LASER/RADAR", "LANE CAMERA" and "ICC/ADAS 2".

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  3.

  3. ACTION TEST 

    Perform the MI-PILOT Assist system action test to check the operation status. Refer to Work Procedure WORK FLOW .

    Check if any other malfunctions occur.

    >>

    GO TO  4.

  4. SYMPTOM DIAGNOSIS 

    Perform the applicable diagnosis according to the diagnosis chart by symptom.

    >>

    GO TO  6.

  5. TROUBLE DIAGNOSIS BY DTC 
    1. Check the DTC in the diagnostic trouble code results.
    2. Perform trouble diagnosis for the detected.
      • LASER/RADAR: Refer to DTC Index (DTC INDEX ).
      • LANE CAMERA: Refer to DTC Index (DTC INDEX ).
      • MI-PILOT/ADAS 2: Refer to DTC Index (DTC INDEX ).
    NOTE: If Network-DTC is detected, first diagnose the CAN communication system.

    >>

    GO TO  6.

  6. MALFUNCTIONING PART REPAIR 

    Repair or replace the identified malfunctioning parts.

    >>

    GO TO  7.

  7. REPAIR CHECK [DIAGNOSTIC TROUBLE CODE WITH SCAN TOOL (M.U.T.-III SE)] 
    1. Erases diagnostic trouble code results.
    2. Perform "Read All DTCs" again after repairing or replacing the malfunctioning parts.
    3. Check if any DTC is detected in diagnostic trouble code results of "LASER/RADAR", "LANE CAMERA" and "ICC/ADAS 2".
      • LASER/RADAR: Refer to DTC Index (DTC INDEX ).
      • LANE CAMERA: Refer to DTC Index (DTC INDEX ).
      • MI-PILOT/ADAS 2: Refer to DTC Index (DTC INDEX ).

    Is any DTC detected? 

    YES >>

    GO TO  5.

    NO >>

    GO TO  8.

  8. REPAIR CHECK (ACTION TEST) 

    Perform the MI-PILOT Assist system action test. Check if the malfunction symptom is solved or no other symptoms occur.

    Is there any malfunction symptom? 

    YES >>

    GO TO  4.

    NO >>

    INSPECTION END

About FixVault