Work Procedure

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Contact backside of the registered keyless operation key* to electric motor switch while brake pedal is depressed, then turn electric motor switch ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain electric motor switch in the ON position for at least 5 seconds.
4. Turn the power supply mode of the electric motor switch to OFF.
5. Check that the engine starts.
>>

GO TO 2.

.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Refer to Description REMOVAL AND INSTALLATION .

>>

END